View IKW75N60T_5045576.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IKW75N60T trenchstop series q power semiconductors 1 rev. 2.1 dec-04 low loss duopack : igbt in trench and fieldstop technology with soft, fast recovery anti-parallel emcon he diode ? very low v ce(sat) 1.5 v (typ.) ? maximum junction temperature 175 c ? short circuit withstand time ? 5 s ? designed for : - frequency converters - uninterrupted power supply ? trench and fieldstop technology for 600 v applications offers : - very tight parameter distribution - high ruggedness, temperature stable behavior - very high switching speed - low v ce(sat) ? positive temperature coefficient in v ce(sat) ? low emi ? low gate charge ? very soft, fast recovery anti-parallel emcon he diode ? complete product spectrum and pspice models : http://www.infineon.com/igbt/ type v ce i c v ce(sat ),tj=25c t j,max marking code package ordering code IKW75N60T 600v 75a 1.5v 175 c k75t60 to-247 q67040s4719 maximum ratings parameter symbol value unit collector-emitter voltage v ce 600 v dc collector current, limited by t jmax t c = 25 c t c = 100 c i c 80 1 75 pulsed collector current, t p limited by t jmax i cpuls 225 turn off safe operating area ( v ce 600v, t j 175 c) - 225 diode forward current, limited by t jmax t c = 25 c t c = 100 c i f 150 75 diode pulsed current, t p limited by t jmax i fpuls 225 a gate-emitter voltage v ge 20 v short circuit withstand time 2) v ge = 15v, v cc 400v, t j 150 c t sc 5 s power dissipation t c = 25 c p tot 428 w operating junction temperature t j -40...+175 storage temperature t stg -55...+175 soldering temperature, 1.6mm (0.063 in.) from case for 10s - 260 c 1 value limited by bondwire 2) allowed number of short circuits: <1000; time between short circuits: >1s. g c e p-to-247-3-1 (to-220ac)
IKW75N60T trenchstop series q power semiconductors 2 rev. 2.1 dec-04 thermal resistance parameter symbol conditions max. value unit characteristic igbt thermal resistance, junction ? case r thjc to-247 0.35 diode thermal resistance, junction ? case r thjcd to-247 0.6 thermal resistance, junction ? ambient r thja to-247 ac 40 k/w electrical characteristic, at t j = 25 c, unless otherwise specified value parameter symbol conditions min. typ. max. unit static characteristic collector-emitter breakdown voltage v (br)ces v ge =0v, i c =0.2ma 600 - - collector-emitter saturation voltage v ce(sat) v ge = 15v, i c =75a t j =25 c t j =175 c - - 1.5 1.9 2.0 - diode forward voltage v f v ge =0v, i f =75a t j =25 c t j =175 c - - 1.65 1.6 2.0 - gate-emitter threshold voltage v ge(th) i c =1.2ma, v ce = v ge 4.1 4.9 5.7 v zero gate voltage collector current i ces v ce =600v , v ge =0v t j =25 c t j =175 c - - - - 40 1000 a gate-emitter leakage current i ges v ce =0v, v ge =20v - - 100 na transconductance g fs v ce =20v, i c =75a - 41 - s integrated gate resistor r gint - ? dynamic characteristic input capacitance c iss - 4620 - output capacitance c oss - 288 - reverse transfer capacitance c rss v ce =25v, v ge =0v, f =1mhz - 137 - pf gate charge q gate v cc =480v, i c =75a v ge =15v - 470 - nc internal emitter inductance measured 5mm (0.197 in.) from case l e t o - 2 47 -3 - 1 - 7 - nh short circuit collector current 1) i c(sc) v ge =15v, t sc 5 s v cc = 400v, t j 150 c - 687.5 - a 1) allowed number of short circuits: <1000; time between short circuits: >1s.
IKW75N60T trenchstop series q power semiconductors 3 rev. 2.1 dec-04 switching characteristic, inductive load, at t j =25 c value parameter symbol conditions min. typ. max. unit igbt characteristic turn-on delay time t d(on) - 33 - rise time t r - 36 - turn-off delay time t d(off) - 330 - fall time t f - 35 - ns turn-on energy e on - 2.0 - turn-off energy e off - 2.5 - total switching energy e ts t j =25 c, v cc =400v, i c =75a, v ge =0/15v, r g =5 ? , l 1) =100nh, c 1) =39pf energy losses include ?tail? and diode reverse recovery. - 4.5 - mj anti-parallel diode characteristic diode reverse recovery time t rr - 121 - ns diode reverse recovery charge q rr - 2.4 - c diode peak reverse recovery current i rrm - 38.5 - a diode peak rate of fall of reverse recovery current during t b di rr /dt t j =25 c, v r =400v, i f =75a, di f /dt =1460a/ s - 921 - a/ s switching characteristic, inductive load, at t j =175 c value parameter symbol conditions min. typ. max. unit igbt characteristic turn-on delay time t d(on) - 32 - rise time t r - 37 - turn-off delay time t d(off) - 363 - fall time t f - 38 - ns turn-on energy e on - 2.9 - turn-off energy e off - 2.9 - total switching energy e ts t j =175 c, v cc =400v, i c =75a, v ge =0/15v, r g = 5 ? l 1) =100nh, c 1) =39pf energy losses include ?tail? and diode reverse recovery. - 5.8 - mj anti-parallel diode characteristic diode reverse recovery time t rr - 182 - ns diode reverse recovery charge q rr - 5.8 - c diode peak reverse recovery current i rrm - 56.2 - a diode peak rate of fall of reverse recovery current during t b di rr /dt t j =175 c v r =400v, i f =75a, di f /dt =1460a/ s - 1013 - a/ s 1) leakage inductance l and stray capacity c due to dynamic test circuit in figure e.
IKW75N60T trenchstop series q power semiconductors 4 rev. 2.1 dec-04 i c , collector current 10hz 100hz 1khz 10khz 100khz 0a 50a 100a 150a 200a t c =110c t c =80c i c , collector current 1v 10v 100v 1000v 1a 10a 100a 10s 50s 1ms dc t p =1s 10ms f , switching frequency v ce , collector - emitter voltage figure 1. collector current as a function of switching frequency ( t j 175 c, d = 0.5, v ce = 400v, v ge = 0/+15v, r g = 5 ? ) figure 2. safe operating area ( d = 0, t c = 25 c, t j 175 c; v ge =15v) p tot , power dissipation 25c 50c 75c 100c 125c 150c 0w 50w 100w 150w 200w 250w 300w 350w 400w i c , collector current 25c 75c 125c 0a 30a 60a 90a 120a t c , case temperature t c , case temperature figure 3. power dissipation as a function of case temperature ( t j 175 c) figure 4. dc collector current as a function of case temperature ( v ge 15v, t j 175 c) i c i c
IKW75N60T trenchstop series q power semiconductors 5 rev. 2.1 dec-04 i c , collector current 0v 1v 2v 3v 0a 30a 60a 90a 120a 15v 7v 9v 11v 13v v ge =20v i c , collector current 0v 1v 2v 3v 0a 30a 60a 90a 120a 15v 7v 9v 11v 13v v ge =20v v ce , collector - emitter voltage v ce , collector - emitter voltage figure 5. typical output characteristic ( t j = 25c) figure 6. typical output characteristic ( t j = 175c) i c , collector current 0v 2v 4v 6v 8v 0a 20a 40a 60a 80a 25c t j =175c v ce(sat), collector - emitt saturation voltage 0c 50c 100c 150c 0.0v 0.5v 1.0v 1.5v 2.0v 2.5v i c =75a i c =150a i c =37.5a v ge , gate-emitter voltage t j , junction temperature figure 7. typical transfer characteristic (v ce =20v) figure 8. typical collector-emitter saturation voltage as a function of junction temperature ( v ge = 15v)
IKW75N60T trenchstop series q power semiconductors 6 rev. 2.1 dec-04 t, switching times 0a 40a 80a 120a 10ns 100ns t r t d(on) t f t d(off) t, switching times 5? 10? 15? 10ns 100ns t r t d(on) t f t d(off) i c , collector current r g , gate resistor figure 9. typical switching times as a function of collector current (inductive load, t j =175c, v ce = 400v, v ge = 0/15v, r g = 5 ? , dynamic test circuit in figure e) figure 10. typical switching times as a function of gate resistor (inductive load, t j = 175c, v ce = 400v, v ge = 0/15v, i c = 75a, dynamic test circuit in figure e) t, switching times 25c 50c 75c 100c 125c 150c 100ns t r t d(on) t f t d(off) v ge(th ) , gate - emitt trshold voltage -50c 0c 50c 100c 150c 0v 1v 2v 3v 4v 5v 6v 7v min. typ. max. t j , junction temperature t j , junction temperature figure 11. typical switching times as a function of junction temperature (inductive load, v ce = 400v, v ge = 0/15v, i c = 10a, r g =5 ? , dynamic test circuit in figure e) figure 12. gate-emitter threshold voltage as a function of junction temperature ( i c = 1.2ma)
IKW75N60T trenchstop series q power semiconductors 7 rev. 2.1 dec-04 e , switching energy losses 0a 20a 40a 60a 80a 100a 120a 140a 0.0mj 4.0mj 8.0mj 12.0mj e ts * e off *) e on and e ts include losses due to diode recovery e on * e , switching energy losses 0? 5? 10? 15? 0.0mj 2.0mj 4.0mj 6.0mj 8.0mj e ts * e off *) e on and e ts include losses due to diode recovery e on * i c , collector current r g , gate resistor figure 13. typical switching energy losses as a function of collector current (inductive load, t j = 175c, v ce = 400v, v ge = 0/15v, r g = 5 ? , dynamic test circuit in figure e) figure 14. typical switching energy losses as a function of gate resistor (inductive load, t j = 175c, v ce = 400v, v ge = 0/15v, i c = 75a, dynamic test circuit in figure e) e , switching energy losses 25c 50c 75c 100c 125c 150c 0.0mj 1.0mj 2.0mj 3.0mj 4.0mj 5.0mj e ts * e off *) e on and e ts include losses due to diode recovery e on * e , switching energy losses 300v 350v 400v 450v 500v 550v 0mj 2mj 4mj 6mj 8mj e ts * e on * *) e on and e ts include losses due to diode recovery e off t j , junction temperature v ce , collector - emitter voltage figure 15. typical switching energy losses as a function of junction temperature (inductive load, v ce = 400v, v ge = 0/15v, i c = 75a, r g = 5 ? , dynamic test circuit in figure e) figure 16. typical switching energy losses as a function of collector emitter voltage (inductive load, t j = 175c, v ge = 0/15v, i c = 75a, r g = 5 ? , dynamic test circuit in figure e)
IKW75N60T trenchstop series q power semiconductors 8 rev. 2.1 dec-04 v ge , gate - emitter voltage 0nc 100nc 200nc 300nc 400nc 0v 5v 10v 15v 480v 120v c, capacitance 0v 10v 20v 100pf 1nf c rss c oss c iss q ge , gate charge v ce , collector - emitter voltage figure 17. typical gate charge ( i c =75 a) figure 18. typical capacitance as a function of collector-emitter voltage ( v ge =0v, f = 1 mhz) i c ( sc ) , short circuit collector current 12v 14v 16v 18v 0a 250a 500a 750a 1000a t sc , short circuit withstand time 10v 11v 12v 13v 14v 0s 2s 4s 6s 8s 10s 12s v ge , gate - emittetr voltage v ge , gate - emitetr voltage figure 19. typical short circuit collector current as a function of gate- emitter voltage ( v ce 400v, t j 150 c) figure 20. short circuit withstand time as a function of gate-emitter voltage ( v ce =600v , start at t j = 25c, t jmax <150c)
IKW75N60T trenchstop series q power semiconductors 9 rev. 2.1 dec-04 z thjc , transient thermal resistance 1 s10 s 100 s 1ms 10ms 100ms 10 -3 k/w 10 -2 k/w 10 -1 k/w single pulse 0.01 0.02 0.05 0.1 0.2 d =0.5 z thjc , transient thermal resistance 100ns 1 s10 s 100 s 1ms 10ms100ms 10 -2 k/w 10 -1 k/w single pulse 0.01 0.02 0.05 0.1 0.2 d =0.5 t p , pulse width t p , pulse width figure 21. igbt transient thermal resistance ( d = t p / t ) figure 22. diode transient thermal impedance as a function of pulse width ( d = t p / t ) t rr , reverse recovery time 1000a/s 1500a/s 0ns 50ns 100ns 150ns 200ns t j =25c t j =175c q rr , reverse recovery charge 1000a/s 1500a/s 0c 1c 2c 3c 4c 5c t j =25c t j =175c di f /dt , diode current slope di f /dt , diode current slope figure 23. typical reverse recovery time as a function of diode current slope ( v r =400v, i f =75a, dynamic test circuit in figure e) figure 24. typical reverse recovery charge as a function of diode current slope ( v r = 400v, i f = 75a, dynamic test circuit in figure e) r ,(k/w) , (s) 0.1968 0.115504 0.0733 0.009340 0.0509 0.000823 0.0290 0.000119 c 1 = 1 r 1 r 1 r 2 c 2 = r 2 r ,(k/w) , (s) 0.1846 0.110373 0.1681 0.015543 0.1261 0.001239 0.0818 0.000120 0.04 0.000008 c 1 = 1 r 1 r 1 r 2 c 2 = r 2
IKW75N60T trenchstop series q power semiconductors 10 rev. 2.1 dec-04 i rr , reverse recovery current 1000a/s 1500a/s 0a 10a 20a 30a 40a 50a 60a t j =25c t j =175c di rr /dt , diode peak rate of fall of reverse recovery current 1000a/s 1500a/s 0a/s -200a/s -400a/s -600a/s -800a/s - 1000a/s - 1200a/s t j =25c t j =175c di f /dt , diode current slope di f /dt , diode current slope figure 25. typical reverse recovery current as a function of diode current slope ( v r = 400v, i f = 75a, dynamic test circuit in figure e) figure 26. typical diode peak rate of fall of reverse recovery current as a function of diode current slope ( v r =400v, i f =75a, dynamic test circuit in figure e) i f , forward current 0v 1v 2v 0a 50a 100a 150a 200a 175c t j =25c v f , forward voltage 0c 50c 100c 150c 0.0v 0.5v 1.0v 1.5v 2.0v 75a i f =150a 37.5a v f , forward voltage t j , junction temperature figure 27. typical diode forward current as a function of forward voltage figure 28. typical diode forward voltage as a function of junction temperature
IKW75N60T trenchstop series q power semiconductors 11 rev. 2.1 dec-04 dimensions symbol [mm] [inch] min max min max a 4.78 5.28 0.1882 0.2079 b 2.29 2.51 0.0902 0.0988 c 1.78 2.29 0.0701 0.0902 d 1.09 1.32 0.0429 0.0520 e 1.73 2.06 0.0681 0.0811 f 2.67 3.18 0.1051 0.1252 g 0.76 max 0.0299 max h 20.80 21.16 0.8189 0.8331 k 15.65 16.15 0.6161 0.6358 l 5.21 5.72 0.2051 0.2252 m 19.81 20.68 0.7799 0.8142 n 3.560 4.930 0.1402 0.1941 ? p 3.61 0.1421 q 6.12 6.22 0.2409 0.2449 to-247ac
IKW75N60T trenchstop series q power semiconductors 12 rev. 2.1 dec-04 figure a. definition of switching times figure b. definition of switching losses i rrm 90% i rrm 10% i rrm di /dt f t rr i f i, v t q s q f t s t f v r di /dt rr q=q q rr s f + t=t t rr s f + figure c. definition of diodes switching characteristics p(t) 12 n t(t) j 1 1 figure d. thermal equivalent circuit figure e. dynamic test circuit
IKW75N60T trenchstop series q power semiconductors 13 rev. 2.1 dec-04 published by infineon technologies ag , bereich kommunikation st.-martin-strasse 53, d-81541 mnchen ? infineon technologies ag 2004 all rights reserved. attention please! the information herein is given to describe certain components and shall not be considered as warranted characteristics. terms of delivery and rights to technical change reserved. we hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. infineon technologies is an approved cecc manufacturer. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office in germany or our infineon tec hnologies representatives worl dwide (see address list). warnings due to technical requirements components may contain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to af fect the safety or effective ness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

▲Up To Search▲

Price & Availability of IKW75N60T

	To Download IKW75N60T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .